Category门类Trade-Mark钢材型号Equivalent to China Standard很国家行业标准Characteristics & application特点和的重要应用领域是什么Equivalent to AWS很AWSHard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48  ，抗刹车盘破损、耐气蚀、抗空气钝化反应 。堆焊回转窑料钟、撕碎机部件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47  ，耐温度、耐蚀、抗刹车盘破损 。堆焊温度零部件如热分割钢刀ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50  ，耐温度、耐蚀、抗刹车盘破损 。堆焊温度零部件如燃气轮机阀ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53  ，耐温度、抗刹车盘破损  ，但抗撞击力差 。堆焊工业bwin·必赢(中国)唯一官方网站燃烧回转水轮D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50  ，耐温度、抗刹车盘破损 。堆焊温度零部件如带钢导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38  ，耐蚀、抗热疲劳过度  ，具备着精生产制作硬底化性 。堆焊热锻模Cast iron生铁Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍  ，综合管理特点好 。生铁薄件及精生产制作面补焊用  ，如磨床导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁  ，效果高、塑形好 。根本灰生铁及球铁焊补用  ，如汽缸筒ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜  ，易精生产制作  ，但抗裂性较低 。不承载力的灰生铁精生产制作面及砂眼补焊ENiCu-BCopper alloys铜不绣钢材质的Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.铜质  ，耐大方  ，海里的水蚀化  ，导电性好 。铜质手工电焊用  ，如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅白铜  ，耐蚀、效果高 。铜、硅白铜及铜质手工电焊用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷白铜  ，耐蚀、效果高 。铜、硅白铜及铜质手工电焊用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝白铜  ，抗刹车盘破损、耐蚀  ，效果高 。铜不绣钢材质的手工电焊或堆焊用ECuAl-A2Aluminum alloys铝不绣钢材质的Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝  ，耐蚀性好  ，但效果不太高  ，纯铝手工电焊用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅  ，抗裂性好  ，适用型性大 。铝不绣钢材质的手工电焊用  ，不得手工电焊铝镁不绣钢材质的E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰  ，效果高  ，耐蚀 。铝不绣钢材质的手工电焊用E3003Nickel alloys镍不绣钢材质的Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍  ，广泛用在镍、镍与钢的手工电焊与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜  ，广泛用在镍铜、镍铜与钢的手工电焊与堆焊ENiCu-7Category门类Trademark钢材型号Chemical composition重要电学成分的材料(%)Characteristics & application特点和的重要应用领域是什么Equivalent to AWS很AWSHardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54  ，抗刹车盘破损、耐气蚀、抗空气钝化反应 。堆焊铲斗齿  ，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47  ，温度下抗刹车盘破损、耐蚀 。堆焊温度髙压高电压电动气动直流高压铜阀ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50  ，温度下抗刹车盘破损、耐蚀 。堆焊高电压电动气动直流高压铜阀  ，带钢孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55  ，温度下抗刹车盘破损、耐温度  ，但抗撞击力差 。堆焊螺旋式放卷机用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53  ，温度下抗刹车盘破损、耐温度  ，但抗撞击较低 。堆焊牙轮麻花钻ECoCr-CCopperalloys铜不绣钢材质的S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.机特点好  ，抗裂性好 。铜质气焊及氩弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.机特点好  ，铜不绣钢材质的氩弧焊及钢的MIG钎焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.抗刹车盘破损性好 。铜不绣钢材质的氩弧焊及钢的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.抗刹车盘破损性好 。铜不绣钢材质的氩弧焊及钢的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.抗刹车盘破损、耐蚀 。铜不绣钢材质的氩弧焊及钢的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.抗刹车盘破损、耐蚀 。铜不绣钢材质的氩弧焊及钢的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约890℃ 。铜质气焊及碳弧焊用  ，也可钎焊铜、钢、生铁S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊剂的S221焊条S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约880℃ 。铜质气焊及碳弧焊用  ，也可钎焊铜、钢、生铁RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊剂的S222焊条RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.融点约900℃ 。铜、钢、生铁钎焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约905℃ 。铜质气焊及碳弧焊用  ，也可钎焊铜、钢、生铁Copperalloys铜不绣钢材质的S 225Cu48 Ni10Zn Rem.Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.融点约935℃ 。高效果,钎焊钢、镍及硬性不绣钢材质的用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊剂的S225焊条RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.融点约900℃ 。铜质气焊用  ，也可钎焊铜、钢、生铁S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点880℃ 。铜质气焊及碳弧焊用  ，也可钎焊铜、钢、生铁RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.融点约920℃ 。高效果,钎焊钢、镍及硬性不绣钢材质的用Aluminum alloys铝不绣钢材质的S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.塑形好、耐蚀 。纯铝气焊、氩弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好  ，适用型性大 。铝不绣钢材质的气焊、氩弧焊用 。不得用高镁不绣钢材质的ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.优良的耐蚀性、可焊性及塑形 。铝不绣钢材质的气焊、氩弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蚀  ，效果高 。铝不绣钢材质的氩弧焊用ER5183斯米克钎焊料分为有：（铜锌钎焊料）  ，（铜磷银基钎焊料）  ，（铝基钎焊料）  ，（锡铅钎焊料）  ，（镍基钎焊料).间介以下的：Category门类Trade-mark钢材型号Specification尺寸规格MeltingPoint融点(℃)Chemicalcomposition重要电学成分的材料(%)Application的重要应用领域是什么Equivalentto AWS很AWSCopperzinc铜锌L103Wire & rod丝885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.钎焊铜、白铜和钢等承载力面积不大零部件L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.钎焊硬性不绣钢材质的加工生产中心刀具Copperphosphorus铜磷L201Cast rod, wire & rod, powder铸条、丝、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜不绣钢材质的BCuP-2L204Cast rod, wire铸条、丝640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.钎焊铜及铜不绣钢材质的、银、钼等废黑色五金 。BCuP-5L205Cast rod, wire & rod, powder铸条、丝、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜不绣钢材质的BCuP-3L207Cast rod, wire & rod铸条、丝640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜不绣钢材质的BCuP-7L209Cast rod, wire铸条、丝684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜不绣钢材质的 。BCuP-6　Silverbase银基L302Wire & rod丝745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜不绣钢材质的、钢及不绣钢材质的等L303Wire & rod丝660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜不绣钢材质的、钢及不绣钢材质的等BAg-5L303FFlux coated rod涂药丝660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂钎剂的L303  ，的重要应用领域是什么与L303想同BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.钎焊铜及铜不绣钢材质的、钢等BAg-6L308Wire & rod丝779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.铜和镍的真空度室或复原保护好的暖场钎焊BAg-8L312Wire & rod丝595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜不绣钢材质的、钢及不绣钢材质的等L313Wire & rod丝625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜不绣钢材质的、钢及不绣钢材质的等BAg-1aL321Wire & rod丝615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜不绣钢材质的、钢及不绣钢材质的等BAg-7L323Wire & rod丝665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜不绣钢材质的、钢及不绣钢材质的等L325Wire & rod丝645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜不绣钢材质的、钢及不绣钢材质的等BAg-36L326Wire & rod丝650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜不绣钢材质的、钢及不绣钢材质的等BAg-34Aluminum base铝基L400Cast rod, wire & rod铸条、丝577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.铝及铝不绣钢材质的的钎焊BAlSi-4L401Cast rod铸条525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.铝及铝不绣钢材质的的钎焊Tin lead锡铅L600Wire & rod丝183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔废黑色五金及热治疗件的钎焊60SnL601Wire & rod丝183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.铜及铜不绣钢材质的、热镀铁条的钎焊 。18SnL602Wire & rod丝183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.铜、铜质、铁、热镀铁条的钎焊30SnL603Wire & rod丝183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.铜及铜不绣钢材质的、钢、锌制器件的钎焊40SnL604Wire & rod丝183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.肉制品、医疗管理需要铜、钢等废黑色五金的钎焊90SnL605Wire & rod丝232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.电子元件、肉制品需要铜、钢等废黑色五金的钎焊L608Wire & rod丝295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.铜及铜不绣钢材质的、钢及不绣钢材质的的钎焊Nickel base镍基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.不绣钢材质的真空度室或保护好的暖场钎焊BNi-2Category门类Trade-mark钢材型号Product name称谓Characteristics & application特点和的重要应用领域是什么Gaswelding气焊CJ301Copper gas welding flux铜气焊熔剂Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.融点约650℃  ，铜及铜不绣钢材质的气焊或钎焊的助熔剂CJ401Aluminum gas welding flux铝气焊熔剂Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.融点约560℃  ，铝及铝不绣钢材质的气焊的助熔剂Silverbrazing银钎焊QJ101Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃规模内内钎焊铜及铜不绣钢材质的、钢及不绣钢材质的的助熔剂QJ102Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃规模内内钎焊铜及铜不绣钢材质的、钢及不绣钢材质的的助熔剂QJ102ASilver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃规模内内钎焊铜及铜不绣钢材质的、钢及不绣钢材质的 。不会变成块状QJ112Silver brazing paste flux膏状银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃规模内内钎焊铜及铜不绣钢材质的、钢及不绣钢材质的的助熔剂QJ103Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃规模内内钎焊铜及铜不绣钢材质的、钢及不绣钢材质的的助熔剂Aluminum brazing铝钎焊QJ201Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃规模内内钎焊铝及铝不绣钢材质的的助熔剂QJ207Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃规模内内钎焊铝及铝不绣钢材质的的助熔剂Category门类Trade-mark钢材型号Chemicalcomposition电学电学成分的材料(%)Hardness密度Application的重要应用领域是什么　Oxy-AcetyleneFlamespray-using氧乙炔焰喷焊F103Cr10 B1.5 Si3 Ni Rem.HRc 25Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.生铁件的喷焊  ，如玻璃板注塑合金机床  ，汽缸、导轨F101Cr10 B2.5 Si3 Ni Rem.HRc 45Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.抗刹车盘破损、耐蚀件的喷焊  ，如高电压电动气动直流高压铜阀、泵电机定转子、泵注塞泵F101FeCr10 B2.5 Si3 Fe10Ni Rem.HRc 45Spray-fusing of corrosion-resistant parts, such as axle and stigma.抗刹车盘破损件的喷焊  ，如轴类、汽门F102Cr16 B4 Si4 Ni Rem.HRc 60Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.抗刹车盘破损、耐蚀、抗温度空气钝化反应零部件的喷焊  ，如注塑合金机床、注塞泵F102FeCr16 B4 Si4 Fe15Ni Rem.HRc 60Spray-fusing of corrosion-resistant parts, such as axle and cold die.抗刹车盘破损件的喷焊  ，如轴类、冷注塑合金机床F105F102+50%WCHRc 60Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗磨轮刹车盘破损的商务活动的喷焊  ，如导板、刮刀、轴流轴流式风机叶面F105FeF102Fe+35%WCHRc 60Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗磨轮刹车盘破损的商务活动的喷焊  ，如导板、刮刀、轴流轴流式风机叶面F108F102+80%WCHRc 60Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗减弱磨轮刹车盘破损  ，不须精生产制作的商务活动的喷焊  ，如挖泥船耙齿F301Cr5 B4 Si4 Ni30Fe Rem.HRc 45Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农机具,选矿厂机易损件的喷焊  ，如小bwin·必赢(中国)唯一官方网站  ，车轴Track iron powder轨铁粉Cr5 B1.5 Si3 Ni30Fe Rem.HRc 28Repair spray-fusing of defects such as scratch and concavity of railroad track.高速铁路铁路钢轨扭伤、低塌等缺陷报告的清理喷焊Oxy-acetylene flame spraying氧乙炔焰喷塑F111Cr5 B1.5 Si3 Ni30Fe Rem.HB 150Spraying of bearing and cutting parts etc.的轴套型号、钻削件等的喷塑F113Cr10 B1.5 Si3 Ni Rem.HB 250Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.喷塑同时可以喷焊  ，如滚桶、注塞泵、耐蚀抗刹车盘破损轴等F313Cr15 B1.5 Fe Rem.HB 250Spraying of dryer of papermaking and axle.纸厂烘缸、轴类的喷塑F314Cr18 Ni9 B1.5 Fe Rem.HB 250Spraying of axle.轴类喷塑F412Sn10 P0.3 Cu Rem.HB 80Spraying of axle and bearing.轴、的轴套型号的喷塑F512符合Al5Ni95Backing spray of transition layer between base and working layer.喷塑层的基体与工作中层当中过渡性（打底妆）层用喷塑PTAhardfacing等阳正阳阳化合物弧喷焊F221Cr26 W5 B0.7 Co Rem.HRc 43PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.温度髙压高电压电动气动直流高压铜阀密封垫面、热分割刃口的等阳正阳阳化合物喷焊F223Cr21 W5 B1.5 Co Rem.HRc 40PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.温度下抗刹车盘破损耐蚀件的喷焊  ，如温度髙压高电压电动气动直流高压铜阀、鼓轴流轴流式风机F321Cr13 B1.5 Si1 Fe Rem.HRc 45PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压高电压电动气动直流高压铜阀的闸板名词解释他抗刹车盘破损件的等阳正阳阳化合物喷焊F322Cr23 Ni13 Si5 B1Fe Rem.HRc 40PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压高电压电动气动直流高压铜阀的阀球名词解释他抗刹车盘破损件的等阳正阳阳化合物喷焊F422Sn10 P0.3 Cu Rem.HB 80PTA hardfacing of axle and bearing etc.轴、的轴套型号等阳正阳阳化合物喷焊